Skip to content
    STOAD 01, product visualisation of the updated development model

    STOAD 01 / LEG EXTENSION

    RECLINED.
    AND SEATED.

    Two positions in one machine. Backrest, seat and shin roller adjust independently.

    EXPLORESTOAD 01 / Product visualisation
    Positions
    2Seated and reclined in one machine
    Weight stack
    180kg30 plates of 6 kg, marked at the pin hole
    Footprint
    1.5m²1170 × 1291 mm in the seated position
    Warranty
    5yearsOn frame and welds
    STOAD 01 with the backrest reclined
    01

    SEATED AND RECLINED

    Recline the backrest or sit upright. One machine, two positions.

    Close-up of the shin roller and the adjusters on STOAD 01
    02

    ADJUSTS TO THE BODY

    Backrest, seat and shin roller adjust independently.

    STOAD 01 / SEE THE FUNCTION

    FROM SEATED. TO RECLINED.

    First the backrest reclines. Then see how the arm, cam and weight stack move together.

    Control every adjustment yourself
    0:00 / 0:08

    Animation from the 3D model of the production model. Final specifications are confirmed in the offer.

    FOOTAGE OF THE EARLY PROTOTYPE

    SEE IT IN USE.

    26 seconds of the early physical prototype in use, reclined and upright. The production model above has been developed further, so details differ.

    What has been demonstrated
    Early prototype · video

    26 seconds from an actual demonstration. Reclined and more upright setups, with closer views of the adjustment beside the seat. No audio.

    About the recording and its evidence

    The clip shows visible use and adjustment of the prototype. It does not measure hip/knee angles, capacity or lifetime. The recording date and prototype version are not published. The description was checked against the clip on 5 September 2026.

    Open the original clip
    STOAD 01 / Interactive model

    Take control in 3D.

    Choose a camera. Explore the backrest, seat, shin roller and movement.

    STOAD 01 leg extensionLOADING 3D MODEL …
    Drag to rotate · Zoom with the buttonsOne finger: scroll · Two: rotate

    New backrest position. The same seat angle.

    The backrest and linkage move. The seat-pad angle stays unchanged. The seat has its own slide, which you can try separately.

    Degrees from the source CAD pose. This is not measured hip flexion.

    ReclinedUpright

    Body reference: one simplified setup during backrest adjustment and extension. Hidden during seat and roller adjustment. It does not establish fit, hip angle or a measured human range of motion.

    The movements illustrate the functions. Final mechanical limits have not been verified.

    SETUP IN THREE STEPS

    KNEE ALIGNED WITH THE AXIS.

    The body reference in 3D explains one illustrated setup. Actual fit and user range require testing and measurement on the finished machine.

    FOR YOUR DECISION

    WHAT YOU GET ANSWERS TO.

    STOAD 01 is built to order. This is what we cover in the walkthrough and what you receive in writing in an offer.

    Positions and adjustment
    Seated and reclined in one machine

    Shown in the 3D model and on the early prototype. Backrest, seat and shin roller adjust independently.

    Weight stack
    180 kg

    30 plates of 6 kg. Each plate is marked at its pin hole, from 6 to 180 kg.

    Dimensions and space
    1779 × 1170 × 1291 mm

    Height × width × length in the seated position. Reclined, the machine is 1599–1711 mm long. The offer includes a dimensioned plan for your facility, transport dimensions and machine weight.

    Warranty and service
    5, 3 and 1 years

    5 years on frame and welds, 3 years on other mechanical parts and 1 year on cable, grips and pads. Warranty labour and travel within Norway are covered in the first year.

    Offer and delivery
    Price in a written offer

    You get the price in the walkthrough and in a written offer including freight and installation. Delivery six months after the order. The deposit is refunded if we do not deliver by the agreed date.

    DIMENSIONS AND SPACE

    THE SPACE IT TAKES.

    STOAD 01 is 1779 mm high, 1170 mm wide and 1291 mm long in the seated position. The light outline shows the machine with the backrest reclined and the leg in motion.

    STOAD 01 from the side with dimensions: height 1779 mm, length 1291 mm seated and 1952 mm as the greatest length in use
    SIDE VIEW
    STOAD 01 from above with dimensions: width 1170 mm, length 1291 mm seated and 1952 mm as the greatest length in use
    TOP VIEW
    Height
    1779 mm
    Width
    1170 mm
    Length, seated
    1291 mmBackrest upright and the arm in its start position.
    Length, reclined
    1599–1711 mmBackrest fully reclined. Varies with the seat setting.
    Greatest length in use
    1952 mmBackrest down, seat fully back, shin roller fully out and the leg in motion.
    Weight stack
    180 kg30 plates of 6 kg.

    Dimensions from the 3D model, 13 November 2026. Machine weight and a dimensioned plan for your facility come with the offer.

    Product status · 16 November 2026

    PRODUCTION MODEL. BUILT TO ORDER.

    STOAD 01 is built to order, and no finished production machine has been built yet. This is what is confirmed, what is measured in the 3D model, what has been shown on the early prototype and what will be documented on the finished machine.

    Confirmed is a fixed specification. Measured in the 3D model means the figure is taken from the design model. Shown on the early prototype means the function has been shown – not that every property has been measured. A development target is an intended direction. Not confirmed means the information needs clarification before a purchasing decision.

    Seated and reclined setupsShown on the early prototype

    An adjustable backrest is shown in the footage of the early prototype. Final backrest angles and ergonomic settings will be measured on the finished machine.

    Watch the footage ↗
    180 kg weight stackConfirmed

    The weight stack is 180 kg: 30 plates of 6 kg. Each plate is marked at its pin hole, from 6 to 180 kg.

    Resistance profileDevelopment target

    The aim is a resistance curve that follows the quadriceps strength profile through the movement. A measured STOAD 01 torque curve has not been published.

    Range of motion · ROMDevelopment target

    The design aims to allow a large range of motion and deep knee flexion. Start and end angles, adjustment range and user limitations require documentation.

    Frame and materialsDevelopment target

    Stainless steel and aluminium are the intended material direction. The final material list, finishes and upholstery will be confirmed before production.

    Service lifeNot confirmed

    Theoretically longer service life is a hypothesis: a larger design margin may reduce wear under the same working load. Actual life also depends on design, materials, maintenance and use. No comparative durability test has been published.

    DimensionsMeasured in the 3D model

    Height 1779 mm, width 1170 mm and length 1291 mm in the seated position. With the backrest fully reclined the length is 1599–1711 mm, depending on the seat setting. The greatest length during the movement is 1952 mm.

    Machine weightNot confirmed

    Machine weight is stated in the written offer. Lead time, payment and warranty are on the Offer and ordering page.

    Development concept: four resistance profiles

    RESISTANCE PROFILES / DEVELOPMENT CONCEPT

    CHOOSE THE EMPHASIS.

    Four calculated target curves. Compare their shapes and see how the emphasis changes.

    Four normalised target profiles from 100 to 15 degrees of knee flexionEach curve is scaled to its own peak of 100 percent. The dashed curve is a digitised strength reference. These are targets, not measured STOAD 01 torque curves.0%50%100%100°80°60°40°15°Knee flexion · bent towards straight
    Own peak = 100%. This compares shape, not equal weight, work or training load. Curves cover 100–15° and are not extrapolated to 0° here.

    A target following the shape of one published strength reference.

    Dashed: seated isometric reference. Approximate figure-3 readings with interpolation; not a universal strength curve. Emphasis variants are engineering choices.

    View the strength reference ↗
    What is calculated, and what is built?

    The targets come from the 26 October 2026 development study. The latest supplier model in the 3D view shows the standard cam. The adjustable oval cam is a separate development study. Later full-ROM calculations did not meet all profile targets. Final curves, cable routing, loading and switching require physical qualification.

    See movement in the supplier model

    Leg extension

    Questions about STOAD 01.

    Content reviewed .

    What is a leg extension machine?

    A leg extension is an exercise in which you extend your knee against resistance. A leg-extension machine trains the quadriceps at the front of the thigh. STOAD 01 is a leg extension with an adjustable backrest, so seated and reclined setups are available in the same machine.

    Watch the physical demonstration

    How do seated and reclined leg extensions differ?

    Backrest position changes the hip angle. Rectus femoris, one of the quadriceps muscles, crosses both the hip and knee. The research page explains studies comparing different hip angles and separates long-term training results from acute measurements. None of these studies tested STOAD 01.

    Read the hip-angle and leg-extension research

    How can I explore STOAD 01’s adjustments?

    The 3D viewer lets you adjust backrest angle, seat, shin roller and movement. The measurements and fit section connects each adjustment to its contact point. Values describe the display model; physical fit and final manufacturing dimensions require confirmation on the finished machine.

    Explore adjustments and fit

    Can a gym buy STOAD 01 now?

    Yes. STOAD 01 is built to order. You pay 50% at order and the rest before dispatch, and the machine is delivered six months after the deposit is received. The deposit is refunded in full if STOAD does not deliver a finished, quality-checked machine by the date in the order confirmation. The machine has a 180 kg weight stack, and machine weight is stated in the written offer.

    See offer and ordering

    How much does STOAD 01 cost?

    You get the price in a 15-minute walkthrough or in a written offer. The offer lists the machine, freight and installation as separate lines for your address.

    Request a price and an offer

    How big is STOAD 01?

    STOAD 01 is 1779 mm high, 1170 mm wide and 1291 mm long in the seated position (1779 × 1170 × 1291 mm). With the backrest fully reclined the length is 1599–1711 mm, depending on the seat setting. The greatest length during the movement is 1952 mm. The dimensions are taken from the 3D model.

    See the dimension drawing

    OFFER BY EMAIL

    REQUEST A PRICE AND AN OFFER.

    Tell us who you are and where the machine will stand, and Jesper will send a written offer with price, freight and installation. If you only have a question, write it in the last field.

    Or call Jesper: +47 90 80 16 17

    The machine is built to order. The price is stated in the offer you receive. See terms and ordering

    Open email with your request

    The button opens your email program with a prefilled message to post@stoad.no. Nothing is sent or stored until you press send yourself.

    STOAD 01 · FØRDE, NORWAY

    LET’S WALK THROUGH IT.

    See the function in 3D and on film. Bring your questions about fit, use and ordering.

    Book a walkthroughA non-binding product walkthrough